Dirt and debris are the mortal enemies of all types of diesel engines. This debris comes in many forms, so it’s important you do everything possible to prevent exterior dirt and debris from entering your diesel engine. Oil, fuel and air filters on your engine must be changed regularly to ensure you keep your vehicle in good condition.

Abrasive contaminants are found literally everywhere, and come in all different categories. Small metal particles or paint residues might be left in the engine after assembly, increasing the likelihood of engine issues down the road. Therefore, you should make sure you ask engine manufacturers about plant contamination control programs.

Fuel and lubricants can also be sources of contamination. If water gets into fuel, for example, this can be a serious concern. Particles can also come from airborne dirt or dust that enters fuel tanks through breathers and vents. It’s almost certain you’ll find at least some small quantity of particles in any stored lubricants or fuels. So while the fuel or oil might be clean when it leaves the refinery, this does not mean it’s clean at the point of use—between the refinery and the usage point it’s passed through pipelines, gone through truck delivery processes, been stored in industrial tanks and pushed through pumps, hoses, nozzles and other devices.

And of course, the air itself is usually not going to be clean in most of the places you use a diesel engine. Think of how much dirt and dust gets kicked up at construction sites, farms and other industrial locations.

All of this is what makes it so important to use diesel fuel filters in Corpus Christi, TX. Here are the filters you should make sure to use:

  • Oli filters: Your engine oil lubricates the moving parts of your engine while also cutting down on heat, improving fuel efficiency and preventing a buildup of sludge and deposits. Your oil filter is designed to keep that engine oil clean by removing particles such as soot that are caused by the breakdown of the oil. If you do not regularly change your oil or use efficient filters, contaminants could build up in the engine, resulting in restricted oil flow and pressure, as well as the formation of hot spots, leading to the breakdown of major engine components.
  • Fuel filters: The primary role of a fuel filter is to clean the diesel fuel in Corpus Christi, TX to prevent damage that results from abrasive particles. It also acts as a water separator, which is almost as important as removing these particles. After all, water contamination can cause poor fuel burn, reduced power and cold spots, as well as untimely corrosion of major components of the engine.
  • Air filters: An average diesel engine uses about 500 cubic meters of air every hour, but a single spoonful of dust could result in catastrophic damage to important components of the engine. An air filter is designed to prevent that damage from occurring.

For more information about diesel fuel filters in Corpus Christi, TX, contact Coastal Diesel Injection today.